Atlantic Shopping / Inspiration-and-advice / How To Remove Dents & Creases From Seats

How To Remove Dents & Creases From Seats

By Sophie Hardy, 28th January, 2016

If you happen to have a dent or crease in the seat of your stool or chair, it is easier to remove than you might think. A dent may occur if a large heavy object is left on the seat or if the product is not carefully stored. This article will talk you through the best method for removing such imperfections.

As an initial plan of action, light dents and creases can be removed by leaving your bar stool or chair in a warm room, the heat will naturally recover the shape of the padding within the seat. Leave your product in the warm room for a week, during this time you may wish to massage or knead the affected area. This method is not likely to damage your chair and should always be tried first.

Bar Stool With Dent In Seat


For more stubborn dents you can try using a steam iron on your product. Ironing carries the risk of damaging your chair or stool so take caution when using this method. Our bar stools and dining chairs come in a variety of materials, and different materials respond differently to heat and steam, so keep this in mind when ironing your seat:

Faux leather is more vulnerable to heat and should not be heated too quickly or for too long as this can cause the surface to bubble or melt

Real leather is a tougher and thicker material that can stand heat for longer, this also means it may take longer to see results in real leather.

Fabric is naturally absorbent, so using steam could cause stains or discolouration. Try ironing without steam first and let it cool, if there is no improvement try one spray of steam.

1. Cover With Towel

As a general rule, always cover the seat with a towel when ironing to protect the surface and make sure the seat is wiped clean before you begin. To avoid discolouration, use a white towel for white, cream, red, and other light coloured seats, and a black towel on dark colours such as black and brown. This is relevant for all materials, for example, using a white towel on a black fabric seat could cause white lint to transfer onto the fabric.

Bar Stool Covered With Towel

2. Steam & Iron

For a leather seat, cover with a suitable towel and use the steam function to spray a burst of steam onto the covered area, and then gently iron over the towel. Remember, for fabric seats try ironing without steam first as it will wet the fabric.


Bar Stool Seat Being Steamed


The steam function can also be used whilst you iron if the crease is particularly tough. Remember to avoid holding the iron in one place for too long as this can cause the material to burn or melt.

You should start to see improvement as you iron, but if the crease or dent is very deep, you can massage and knead the area whilst it is warm to aid the removal process. After you have steam ironed the seat, wipe down and dry it with a towel to remove any excess moisture.


Bar Stool Being Steam Ironed

3. Allow To Cool & Repeat

Do not heat the seat for too long, if the crease persists you should allow the seat to cool down and repeat the process when completely cooled. For best results and to better protect your chair, wait a week or so before repeating.

Bar Stool With Dent Removed


Please note: These procedures are to be undertaken at your own risk. Atlantic Shopping will not be held responsible for any damage incurred.

Related Articles

Assembly of Bar Stools

A step-by-step guide and video, helping you to put together your new bar stools..

Read More

How to Disassemble a Bar Stool

Learn how to take apart your bar stools in just three simple steps..

Read More

How to Fix a Squeaky Bar Stool

Got a squeaky bar stool? Discover our top tips for stopping the squeak..

Read More

Maintaining Your Bar Stools

Learn everything you need to know about maintaining your new bar stools..

Read More

Buying Guides

Email to a Friend